Enable temporary viewing of all partitions by pressing *, 1, partition number. If there is a system problem, pressing *2, shows the service menu. Will not allow the Service LED to light for any reason.

Sounds a short beep to verify that the keypress was accepted.

Enable panic, fire, emergency beep tone.

Will not allow the keypad to display faulted or bypassed zones when the system is armed. Silences the pulsing keypad sounder for 5 seconds when a key is pressed. Silences the entry/exit sounder and chime only.

Press * after enabling/disabling the desired functions.

You will be presented with options, one at a time, that will enable/disable the functions for the keypad shown in the list below.

Step 2 – Set keypad options (For LCD Keypads)

The keypad will automatically exit the keypad programming after this You will now enter the partition you want the keypad to be assigned to.The Instant LED will illuminate steady and the Service LED will remain flashing

The Service LED and the Instant LED will flash on the keypad that you are working on Step 1 – Assign keypad number and partition

You will then be asked to enter location.

Total Connect 2.0 Package Monitoring Add-Ons.

Central Station Alarm Monitoring Services.

Ge networx software